Oil & Gas Lithium Battery Packs for OEM Instrumentation
Lithium Battery Company supplies 12V/24V-class LFP and NMC battery designs (3.7–28V, 1.5–720Ah) for OEM equipment. CANbus, RS485 and SMBus options are reviewed per design. Catalog programs start at 10 units; custom designs at 25. OEM delivery covers the United States, Canada, and Mexico with UN 38.3 transport documentation.
LBC / Oil & Gas
Lithium Battery Company designs oil and gas lithium battery packs for OEM instrumentation, monitoring and remote equipment that must hold a defined load through temperature, vibration and long service intervals. Programs start from the electrical brief—voltage window, duty cycle, runtime and recharge opportunity—then lock enclosure fit, ingress and the equipment interface before cells and BMS limits are fixed. Catalog reference designs begin at 10 units; custom configurations begin at 25.
Why choose LBC for oil & gas battery packs
Load, runtime and temperature
Describe monitoring loads, remote runtime and the operating temperature range.
Ingress, vibration and mechanical fit
Define ingress, vibration and enclosure fit for instrumentation and monitoring equipment.
Safety and validation requirements
Set safety and validation requirements for the equipment’s operating environment.
Start your spec
Send equipment load, runtime, voltage window, available space and quantities for a pack proposal.
Get a Quote →Design / Integration
Recommended pack types for oil & gas
LFP and NMC designs for instrumentation and monitoring loads, matched to the enclosure.
- 12V LFP monitoring / RTU packs — cabinet and skid instrumentation, modem/SCADA loads
- 24V industrial packs — higher-rail controls and multi-sensor nodes
- 48V packs — denser remote power and shared DC buses
- Need a non-catalog envelope or hazardous-area documentation path? Request a custom pack quote
Send load, runtime, temperature range, enclosure constraints and quantity via the configurator or custom quote form. Email and on-site chatbot only—no public phone number.
Get a Quote ↗Catalog from 10 units · Custom from 25.
How custom battery quoting works →Oil & Gas battery design requirements
Industrial instrumentation packs need requirements for remote runtime, temperature, vibration, ingress and the equipment interface. LBC supports pack design and custom manufacturing; environmental and safety requirements must be reviewed for the particular application.
Share the voltage window, continuous and peak load, runtime, available space, charge source, environment, communications, scope and forecast so LBC can review a suitable design and production path.
- Load, runtime and temperature
- Ingress, vibration and mechanical fit
- Safety and validation requirements
Oil & Gas battery pack FAQ
What environmental conditions should an oil and gas instrumentation pack survive?
Define ambient and storage temperature, ingress rating, vibration/shock, corrosive exposure, enclosure material constraints and any hazardous-area documentation the equipment program requires. Pack mechanical and BMS limits are set from that brief, not from a generic catalog assumption.
How is remote runtime sized for monitoring and SCADA gear?
Runtime is calculated from average and peak load, duty cycle, temperature derating, reserve margin and recharge opportunity. Send the load profile and service interval; LBC converts that into capacity, chemistry recommendation and charge strategy for review.
Can oilfield packs support long idle periods with low self-discharge?
Yes—design choices prioritize storage temperature, BMS sleep current, disconnect strategy and recharge method for long idle windows. Exact idle current and storage recommendations are confirmed against the approved cell and BMS combination.
What documents should accompany an oil and gas battery RFQ?
Equipment description, voltage window, load/runtime, enclosure drawings, connector pinout, charger spec, monitoring interface, quantities and any test or sourcing requirements already on the program. Incomplete briefs slow feasibility review.